Semiautomatic dough divider

DIVIDER SEMIAUTOMATIC
Machine hydraulic operation, a double acting cylinder for pressing phase and cutting. All functions are performed using a joystick that allows only pressing, pressing with cutting and cleaning blades very easily and quickly.

The semiautomatic portioning are machines that can cut a piece raw dough in several portions, both small and large, with a shape and a weight depending on the model.

displacement hydraulic machine with a double acting cylinder for pressing phase and cutting. All functions are performed by a single joystick that allows pressing, pressing to cut, the descent and cleaning knives very quickly and easily.


Duty cycle 1. introducing the product in Cuba;
2. closing the cover
3. use the joystick (molding and cutting);
4. manual opening of the lid;
5. remove the dough portions cut

Pressing Time:. is the time it serves to distribute the mass inside the Cuba uniformly, so that in the cutting phase each portion has the same weight and volume. If the outer portions have a higher internal weight, it is necessary to decrease the time; But if the weight is less, it is necessary to increase the time

. Tip: put a generous amount of flour in Cuba and above the product, thereby facilitating the distribution of mass in Cuba; , it will be easier when cutting keep portions obtained well separated from each other

Cutting time:. is the time necessary for the blades to cut the product uniformly within the Cuba

Optional. portarejilla support (only portioning or rectangular presses Cuba) regulating high and low pressure 25-40 bars fairing stainless steel

MATERIALS USED
electrowelded steel frame painted;
coatings painted steel or stainless steel tanks and printheads
anticorodal aluminum MG5 with anodization;.
knives and grids 304 stainless steel;
inner surface of the lid and pressure devices polyethylene PE500 food, food trays
PETG polyethylene;.
ring coated aluminum electroless nickel

POWER
All machines are supplied as standard with connection 400 volt 50 Hz 3 phase. Upon request, can be supplied with different voltages.
All machines comply with CE standards and are manufactured in Italy.

E20SA strong>
Divisions 20
Shape: Rectangular
minimum weight: 150 gr
maximum weight: 1000 g
basin capacity: 20 kg
Press: 100 x 100
Capacity per hour: 2400

PETG polyethylene food trays;.
ring coated aluminum electroless nickel

POWER
All machines are supplied as standard with connection 400 volts 50 Hz 3 phase. Upon request, can be supplied with different voltages.
All machines comply with CE standards and are manufactured in Italy.

E20SA strong>
Divisions 20
Shape: Rectangular
minimum weight: 150 gr
maximum weight: 1000 g
basin capacity: 20 kg
Press: 100 x 100
Capacity per hour: 2400
PETG polyethylene food trays;.
ring coated aluminum electroless nickel

POWER
All machines are supplied as standard with connection 400 volts 50 Hz 3 phase. Upon request, can be supplied with different voltages.
All machines comply with CE standards and are manufactured in Italy.

E20SA strong>
Divisions 20
Shape: Rectangular
minimum weight: 150 gr
maximum weight: 1000 g
basin capacity: 20 kg
Press: 100 x 100
Capacity per hour: 2400 br /> POWER
All machines are supplied as standard with connection 400 volt 50 Hz 3 phase. Upon request, can be supplied with different voltages.
All machines comply with CE standards and are manufactured in Italy.

E20SA strong>
Divisions 20
Shape: Rectangular
minimum weight: 150 gr
maximum weight: 1000 g
basin capacity: 20 kg
Press: 100 x 100
Capacity per hour: 2400 br /> POWER
All machines are supplied as standard with connection 400 volt 50 Hz 3 phase. Upon request, can be supplied with different voltages.
All machines comply with CE standards and are manufactured in Italy.

E20SA strong>
Divisions 20
Shape: Rectangular
minimum weight: 150 gr
maximum weight: 1000 g
basin capacity: 20 kg
Press: 100 x 100
Capacity per hour: 2400